Solar power satellite rectenna design study: Directional receiving elements and parallel-series combining analysis

Rectenna conversion efficiencies (RF to dc) approximating 85 percent were demonstrated on a small scale, clearly indicating the feasibility and potential of efficiency of microwave power to dc. The overall cost estimates of the solar power satellite indicate that the baseline rectenna subsystem will be between 25 to 40 percent of the system cost. The directional receiving elements and element extensions were studied, along with power combining evaluation and evaluation extensions

Low temperature growth and electrical characterization of insulators for GaAs MISFETS

Progress in the low temperature growth of oxides and layers on GaAs and the detailed electrical characterization of these oxides is reported. A plasma anodization system was designed, assembled, and put into operation. A measurement system was assembled for determining capacitance and conductance as a function of gate voltage for frequencies in the range from 1 Hz to 1 MHz. Initial measurements were carried out in Si-SiO2 capacitors in order to test the system and in GaAs MIS capacitors abricated using liquid anodization

Research on gallium arsenide diffused junction solar cells

The feasibility of using bulk GaAs for the fabrication of diffused junction solar cells was determined. The effects of thermal processing of GaAs was studied, and the quality of starting bulk GaAs for this purpose was assessed. These cells are to be made by open tube diffusion techniques, and are to be tested for photovoltaic response under AMO conditions

Diffused P+-N solar cells in bulk GaAs

Recently melt grown GaAs, made by liquid encapsulation techniques, has become available. This material is of sufficiently good quality to allow the fabrication of solar cells by direct diffusion. Results obtained with p(+)/n junction solar cells made by zinc diffusion are described. The quality of bulk GaAs for this application is evaluated

Encapsulated diffusion of sulphur into InP

This talk outlines a simple process for the fabrication of n(+)-p solar cells in indium phosphide. Large area cells (greater than 0.25 sq cm) have been made by this process, with a photovoltaic conversion efficiency of 15.21 percent under AM0 conditions of illumination. An ideality factor of 1.1 and a saturation current density of 8 x 10 to the minus 15th power A/sq cm have been observed for these cells. The technique for cell fabrication involves the diffusion of sulfur into InP by an open tube process, and gives highly reproducible results from run to run. A vacuum-deposited layer of gallium sulphide (Ga2S3) was used as the source for sulfur diffusion, with a chemically vapor deposited SiO2 cap layer to prevent decomposition of the InP surface during heat treatment. Diffusions were carried out in a flowing nitrogen ambient at 585 to 708 C, and characterized by their surface carrier concentration and the diffusion constant. The diffusion profile for sulfur in InP is estimated to be of the complementary error function type. The activation energy of the diffusion was estimated to be 1.94 eV. The technique described here is ideally suited for the fabrication of shallow n(+)-p junctions in InP, and has been used for space-borne solar cells

Importância da Avaliação Funcional Respiratória em Idade Precoce

As provas de função respiratória são instrumentos de quantificação objectiva do compromisso pulmonar utilizadas na confirmação diagnóstica, monitorização após terapêutica e avaliação do prognóstico de diversas patologias. Tem sido possível nos últimos anos a sua aplicação em crianças mais jovens, com benefícios evidentes, pela possibilidade de atempadamente monitorizar e alterar o curso natural de certas doenças. As provas de função respiratória no lactente e em idade pré-escolar revestem-se de particularidades metodológicas, tendo ocorrido recentemente um grande interesse da comunidade científica neste âmbito, com grandes progressos nesta área. Pretende-se no presente artigo enumerar as técnicas de função respiratória disponíveis em idade precoce, explicitando a sua fundamentação teórica, metodologia e aplicabilidade. Será dado particular destaque às técnicas mais inovadoras aplicadas no lactente – técnicas de compressão torácica rápida em volume corrente e volume aumentado, bem como em idade pré-escolar – pletismografia sem oclusão e espirometria animada. Embora as provas funcionais do lactente permaneçam no domínio da investigação, pela sua controversa aplicabilidade individual, as provas de função respiratória em idade pré-escolar são muito promissoras para o futuro

Extending Qualitative Spatial Theories with Emergent Spatial Concepts: An Automated Reasoning Approach

Qualitative Spatial Reasoning is an exciting research field of the Knowledge Representation and Reasoning paradigm whose application often requires the extension, refinement or combination of existent theories (as well as the associated calculus). This paper addresses the issue of the sound spatial interpretation of formal extensions of such theories; particularly the interpretation of the extension and the desired representational features. The paper shows how to interpret certain kinds of extensions of Region Connection Calculus (RCC) theory. We also show how to rebuild the qualitative calculus of these extensions.Junta de Andalucía TIC-606

Enhancing declarative process models with DMN decision logic

Modeling dynamic, human-centric, non-standardized and knowledge-intensive business processes with imperative process modeling approaches is very challenging. Declarative process modeling approaches are more appropriate for these processes, as they offer the run-time flexibility typically required in these cases. However, by means of a realistic healthcare process that falls in the aforementioned category, we demonstrate in this paper that current declarative approaches do not incorporate all the details needed. More specifically, they lack a way to model decision logic, which is important when attempting to fully capture these processes. We propose a new declarative language, Declare-R-DMN, which combines the declarative process modeling language Declare-R with the newly adopted OMG standard Decision Model and Notation. Aside from supporting the functionality of both languages, Declare-R-DMN also creates bridges between them. We will show that using this language results in process models that encapsulate much more knowledge, while still offering the same flexibility

Solar cells in bulk InP using an open tube diffusion process

A simple open tube diffusion technique for the fabrication of n+p junction solar cells is described. Large area (greater than 0.25 square cm) solar cells have been made by this process with a photovoltaic conversion efficiency of 15.2 percent under simulated AMO illumination. An ideality factor is 1.04 and a saturation current density of 9.6 times 10 to the minus 16th power A/square cm have been observed for these cells. These are the lowest (best) values reported to date for diffused structures in bulk InP